Print Page | Close Window

Per minute resolution?

Printed From: TMS Software
Category: VCL Components
Forum Name: VCL Planners
Forum Discription:
URL: http://www.tmssoftware.com/site/forum/forum_posts.asp?TID=13334
Printed Date: 18 Oct 2019 at 4:51pm


Topic: Per minute resolution?
Posted By: Peck Sally
Subject: Per minute resolution?
Date Posted: 29 Apr 2019 at 2:19am

How do I enable per-minute resolution instead of the default 30 mins?




Replies:
Posted By: Bruno Fierens
Date Posted: 29 Apr 2019 at 8:20am
The unit of timeslots can be set with
Planner.Display.DisplayUnit


Posted By: Peck Sally
Date Posted: 06 May 2019 at 4:15am
I want to do like this.

q1. What setting do I set, so that, if the time is 2:10, it shows as 2:10 on the planner instead from 2:00 ?

q2. How do I get per-minute resolution on this Planner?, when visibly, I want to get 1 minute slice when the display unit is per 30 minutes?

Please see attached.





Posted By: Peck Sally
Date Posted: 06 May 2019 at 4:16am
https://ibb.co/z6RQrKN">

https://ibb.co/C9fjtS6">


Posted By: Bruno Fierens
Date Posted: 06 May 2019 at 3:50pm
1) You could do this by setting selecting a 1 minute time slot via Planner.Display.DisplayUnit = 1
The timeslot size in pixels is set via Planner.Display.DisplayScale

2) When this is for viewing purposes only, you could also set Planner.DrawPrecise = true and it will draw the items on time basis and not on time slot basis (with large timeslot sizes)



Print Page | Close Window